Ezviz C3N Mode D'emploi page 13

Option 2: Connect your PoE camera to a router.
Steps:
1. Connect the power adapter cable (sold separately) to the camera's
power port.
2. Plug the power adapter into an electrical outlet.
3. Connect the Ethernet cable to the PoE port of your camera.
4. Connect the other end of the Ethernet cable to the LAN port of a
router.
• The LED turning slow-flashing blue indicates that the camera is
connected to the Internet.
• The Ethernet cable is not included in the package.
5. Log in to your account using the EZVIZ app.
6. On the Home screen, tap "+" on the upper-right corner to go to the
Scan QR Code interface.
7. Scan the QR code on the Quick Start Guide cover or on the body of
the camera.
8. Follow the wizard to add the camera to the EZVIZ app.
Router
Ethernet Cable
DC12V 1A
Power Adapter
8