Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. To cut covers please repeat steps 1 - 3.
The rims of the cover must be on top when cutting.
Replacement of the blade
1. To remove the blade, remove the screw and pull the blade straight out.
2. Grease the slide faces of the blade with the included multi-purpose grease.
3. To install the knife depress the blade guard and slide the blade back on to the holding fixture.
Then tighten the screw.
Do not transport or store the blade without suitable cut protection.
13
Publicité
Table des Matières
