Télécharger Imprimer la page

Korg TMR-50 Manuel D'utilisation page 19

Accordeur métronome enregistreur

Publicité

Les langues disponibles

Les langues disponibles

Using the metronome
Setting the tempo and time signature
1.
Press the METRONOME ON button.
The pendulum of the metronome will appear
on the display and "
appear above.
2.
Press the TEMPO p or q button to set
the tempo.
Press and hold the TEMPO p and q
buttons simultaneously for 1 second to
switch between Pendulum Step (pendulum
of a mechanical metronome) and Full Step.
If Pendulum Step is selected, "
appear on the display.
After selecting "PENDULUM STEP" or
"FULL STEP", press the TEMPO p, q
buttons to set the tempo. This setting is
remembered even when the power is off.
If you've selected "PENDULUM STEP"
Pressing the TEMPO p, q buttons will switch
the tempo successively through the following
values. The value will change continuously if
you hold down the button.
30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52,
" will
54, 56, 58, 60, 63, 66, 69, 72, 76, 80, 84, 88,
92, 96, 100, 104, 108, 112, 116, 120, 126, 132,
138, 144, 152, 160, 168, 176, 184, 192, 200,
208, 216, 224, 232, 240, 252
If you've selected "FULL STEP"
Pressing the TEMPO p, q buttons will
increment or decrement the tempo through
the range of 30–252 in steps of one. The
" will
value will change continuously if you hold
down the button.
3.
Press the START/STOP button to start
the metronome.
The metronome pendulum will swing from
left to right according to the tempo and the
TAP TEMPO button will blink according
19

Publicité

loading