Blitz Lastenregler 0,5 Mode D'emploi page 57

8.6 Transporting the load



8.7 At the end of the work


9 Servicing
9.1 Servicing plan
Service load carrying equipment that is used continuously or in a particularly dirty environment more
frequently.
Likewise, an additional check is necessary after exchanging parts which are relevant to safety when
carrying out servicing work.
Interval
Before commissioning for the
first time
Before each use
Weekly
Annual
Every 3 years
9.2 Visual check before each use


9.3 Regular check (initial check)






122253
Do not convey the load over people.
Always transport the load slowly and evenly.
Always deposit the load securely on a sound substrate.
After the lifting/transport process, always store the load carrying equipment in its
defined storage place.
Never allow unattended load carrying equipment to hang on the crane.
Servicing work
Initial check (see 9.3)
Visual check(see 9.2)
Cleaning
Regular check (see 9.3)
Check to ensure there are no cracks(see 9.4)
Efficiency of the safety equipment.
Mechanical damage as a result of crushing, indentation, formation of cracks
or breakage.
Efficiency of the safety equipment.
Mechanical damage as a result of crushing, indentation, formation of cracks
or breakage.
Deformation as a result of bending, twisting or impressions.
The rating plate/load capacity plate of the load carrying equipment must be legible.
The marker tags of the attachment chain must be available and legible.
Secure fitting of screws and nuts.
Load handling device
Servicing
53