CALIMA 46061 Manuel De L'opérateur page 5

5. OPERATING INSTRUCTIONS
5.1 OVERVIEW
4 Suction plate
1 Lever
5 Strap for removal
2 Ring
3 Casing
Figure 1: Overview
5.2 MOUNTING THE SUCTION PAD
The suction pad can only be attached to even, smooth surfaces.
Rough, grainy or curved surfaces are not suitable, likewise
surfaces with decor lms or surfaces with a xed stickers.
The attachment surface must be adequately
stable.
Before mounting, clean the suction plate (Position 4 in the
overview) and the surface to which the suction pad should be
attached.
Attach the suction pad as shown on Picture 2.
Picture 2: Mounting
5.3 REMOVAL OF THE SUCTION PAD
To release the suction pad, proceed as shown on Picture 3.
Picture 3: Release
6. MAINTENANCE AND CARE
The suction pad is maintenance-free if used properly. Protect the
suction plate against damage. Only use a mild soapy solution for
cleaning.
7. INFORMATION ON ENVIRONMENTAL PROTECTION
Dispose of the suction pad in the recycling bin or the public/
communal collection points. The materials are recyclable. You
make an important contribution to protecting our environment
by recycling, material utilisation or other forms of reusing waste
equipment.
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5