DMG Honigum-Light Manuel page 11

Instructions for use
Product description
Honigum-Light is a correction impression mate-
rial based on A-silicones.
The material is available in the Automix safety
cartridge.
Indications
• Crown and bridge impressions
• Inlay and onlay impressions
Basic Safety Instructions
• For dental use only!
• Keep out of reach of children!
Interactions with other materials
• Rinse residues of retraction solutions thor-
oughly with water, otherwise these in some
instances can increase the setting time.
• Never allow the impression to come into
contact with organic solvents or liquids con-
taining solvents as this may result in a swell-
ing of the material and may therefore lead to
English
inaccuracies in the cast.
• Never allow the impression material to come
into contact with latex gloves. DMG recom-
mends the use of PVC or PE based gloves.
• Do not mix Honigum-Light with condensa-
tion curing silicone or polyether impression
materials.
Using the Automix cartridge
F
D
E
G
C
B
A
11