Royal Catering RCPES-380 Manuel D'utilisation page 25

This operation should be carried out by a qualified electrician.
ASSEMBLY OF THE UNIT
RCPES-340
Before starting work with the unit, place the heating element covers [3; 4;
5] in the supports [9]. Each heating element must be protected with an
appropriate cover!
3.3.
Working with the unit
|
RCPES-380 RCPES-280
a) Make sure that the knobs for the timer [3] and the temperature regulator [4]
are in the OFF position.
b) Insert the plug into the electrical outlet.
c) Set the desired temperature with the rotary knob [4].
d) Set the operating time with the timer knob [3].
e) When you have finished grilling, pull out the grate [5] (with food) by holding
both handles [6]. Be careful and wear protective gloves to avoid burns.
f) When you have finished working with the unit, turn the temperature control
knob [4] to the OFF position, make sure that the timer knob is in the OFF
position, and then unplug the unit from the electrical outlet.
If overheating occurs, the unit will automatically turn off.
In this case, please:
- turn the temperature control knob [4] and the timer [3] to the OFF position,
- Let the unit cool down,
- Remove the black cap of the RESET button [A] and press it to switch the unit on
again.
RCPES-340
a) Make sure that the timer knob [2] is set to OFF and the "I/O" switches of the
heating elements [1] are in the "O" position.
b) Insert the plug into the electrical outlet.
c) Switch on the selected heating elements using the corresponding buttons [1].
d) Set the operating time with the timer knob [2].
e) When you have finished grilling, pull the grill grate [6; 7] together with the
food out by holding the grill handle. Be careful and wear protective gloves to
avoid burns.
f) When you have finished working with the unit, set all the "I/O" switches of
the heating elements to the "O" position, make sure that the timer knob is in
the OFF position, and then unplug the unit from the electrical outlet.