Operation - Kuppersbusch ITE1780-0E Notice D'utilisation

OPERATION

Control panel
ON/OFF button
1
Mode button
2
Display
3
Temperature colder button
4
Temperature warmer button
5
DrinksChill button
6
Display
After selection of Mode or the
temperature button the
animations
selection of the temperature the
animation flashes for a few
minutes.
Switching on
Connect the mains plug to the power
socket
1. Press the ON/OFF if the display is off.
The temperature indicators show the set
default temperature.
2. The alarm buzzer may sound after a few
seconds.
1 2
A B C D
E
starts. After
3 4 5
It is possible to change predefined sound of
buttons to a loudly one by pressing
together Mode and temperature colder
button for some seconds. Change is
reversible.
A) Alarm indicator
B) Freezer EcoMode function
C) FastFreeze function
D) Freezer temperature indicator
E) DrinksChill function
To reset the alarm refer to "High
temperature alarm".
If "DEMO" appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting...".
To select a different set
temperature refer to
"Temperature regulation".
Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from the
power socket.
6
21