Monogram ZGU384N Instructions D'installation page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

COOKTOP INSTALLATION OVER A
27" OR 30" MONOGRAM SINGLE OVEN,
MODEL ZET1, ZEK938 OR ZET938
These cooktops may be installed over the
Monogram ZET1, ZEK938 or ZET938 single oven.
Both the cooktop and the oven must be installed
according to each specific installation instruction.
– Allow 4" Min. clearance from the top of the
countertop to the top of the oven cutout.
23-1/2" min.
4" high
toekick
Use a 30" or wider base cabinet.
• For best appearance, the cooktop should be
centered over the oven.
Installation Options
Cooktop
28-1/2"
19-5/8"
Use two 2x4's or equivalent runners spaced 25" centerline
to centerline in the opening and flush with top of toekick.
Or elevate the oven floor to desired height. The support must
be level, rigidly mounted and capable of supporting 200 lbs.
POWER SUPPLY
The oven requires a separate, properly grounded
20 Amp, 3-wire 208 or 240 volt, 60 Hz power supply.
The cooktop requires a separate 120V power supply.
See page 8. Where codes permit, the gas shut-off
valve may be located in an adjacent cabinet or
other easily accessible location.
1-1/2" cabinet top
25"
2-1/2" min.
4" min.
A
B
Ovens
30"
C L
27"
25"
C L
14
36"
countertop
height
Dim. A
Dim. B
28-1/2" min. 27-1/4" min.
28-5/8" max. 27-5/16" max.
25" min.
27-5/8" min.
25-1/4" max. 28-1/8" max.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Zgu384l

Table des Matières