Publicité
Les langues disponibles
Les langues disponibles
INTIAL SCAN
When this unit is switched on for the first time at TUNER mode, then press MODE button switching to
DAB, the scanning display will be shown while the scanning process takes place:
The radio scans all usable stations (full scan) and stores them alphanumerically -1 Radio, 2
Radio, AA Radio, AB Radio...The initial scan will take a few minutes. After the scan, the clock
will be set and the radio will play the name of the first station in the sequence. To browse for
another station, refer to the next section.
BROWSING FOR A STATION
To browse for another DAB station from the top panel controls:
· Turn the TUNING knob.
<Station list> will be displayed.
· Press the TUNING/ SELEC T knob to select the station displayed.
After short delay, the radio will tune to the station
ADJUSTING THE VOLUME
To adjust the volume from the front panel controls:
Turn the VOLUME knob to increase or decrease the volume level.
CLOCK SET
SET TIME/DATE: This main option enables the clock to be set manually if these is no available
DAB transmission.
To set the time and data manually:
• When unit during Standby mode, press MENU button then turn the TUNING knob to select Set
Clock. Press TUNING/ SELECT knob to confirm.
• Set the clock mode 12/ 24 Hour, turn the TUNING/ SELECT knob to choose 12 or 24 time
format then press again to next setting.
• Set Hour, turn the TUNING/ SELECT knob to set the hour, then press again to confirm
• Set Min, turn the TUNING/ SELECT knob to set the minute, then press again to confirm
Publicité
