SOUNDMASTER SCD7900SW Mode D'emploi page 31

TROUBLESHOOTING
Poor quality radio reception
The aerial signal may not be adequate. Try repositioning the aerial while watching the
signal
strength. Signal strength can be displayed by tuning to a DAB station. Press the INFO.
button then turn the TUNING knob,
.
PROBLEM
No sound / power
CD display does not
function properly / No
reaction to operation of
any of the controls
The CD skips tracks
Poor Cassette
Sound Quality
Poor DAB/ FM reception
• Volume not adjusted. Adjust the volume.
• Mains cable not securely connected. Connect the mains cable
properly.
• Batteries dead/incorrectly inserted. Insert (fresh) batteries correctly.
• CD contains non-audio/ Mp3 files. Turn the TU NIN G knob
repeatedly to skip to a CD or MP3 audio track, instead of the data file.
• Ensure the function selector is switched to the correct work.
• Ensure the current MODE is correctly selected.
• Electrostatic discharge. Switch off and unplug the unit. Reconnect
after a few seconds.
• No CD inserted. Insert a CD.
• CD badly scratched or dirty. Replace or clean the CD, see
Maintenance.
• Laser lens steamed up. Wait until lens has cleared.
• CD-R / CD-RW is blank or not finalized. Use a finalized CD-R / CD-
RW or a suitable CD Audio disc only.
• Make sure the CD is not encoded with Copyright protection
technologies, as some do not conform to the Compact Disc
standard.
• Set the FUNCTION selector to CD/USB position, then
Press MODE button switching to CD mode.
• CD damaged or dirty. Replace or clean CD.
• Program is active. Quit program mode.
• A CD badly scratched or dirty may result in improper operation.
• Dust and dirt on the heads, etc. Clean deck parts, see Maintenance.
• Use of incompatible cassette types (METAL or CHROME).
• Make sure FM aerial wire is fully extended.
• Electrical interference in your home can cause poor reception. Move
the unit away from them (especially those with motors and transformers).
CAUSE /
SOLUTI
ON