Human Safety - Active TIGERCUT 25 Manuel D'utilisation Et D'entretien

3. Do not misuse the power cord. Do not lift or pull up the pruning shear by the power
cord. Keep the pruning shear away from heat, oil, sharp edges or moving parts.

Human Safety

Use suitable clothing and protective shoes with non-slip soles.
Use protective gloves.
Use protective glasses.
1. Do not wear loose clothing or jewelry that could get caught in the parts
in movement.
2. Maintain attention, do not get distracted, use common sense during use
tool. Do not use the tool if excessively tired or under the e ect
of drugs, drugs, alcohol or other substances.
3. Do not use the scissor in rainy weather.
4. The tool is designed for pruning branches, do not use on hard or wood
other items.
5. If the blade is stuck, do not try to unlock it before putting
the ignition switch in the OFF position.
6. Before starting the pruning work, make sure that they are not present in
the branches hidden objects or cables of various kinds.
7. During use, rmly grasp the tool with one hand and hold the
blade at least 15 cm away from the other hand and the rest of the body.
8. Do not use the tool near ammable liquids or gases to avoid the
risk of re or explosions.
9. The wear of the blade must be checked at regular intervals. Sharpen the blades
if necessary. Blunt blades overload the tool. Damage resulting from
use with blades in bad condition are not covered by warranty.
10. Don't try to repair the tool yourself. Always go to service centers
authorized in case of need for repairs. All maintenance operations
and repair, not described in this manual, must be carried out by a
service center.
11. Prevent accidental activation. Make sure that the switch is in position
OFF when the tool is connected to the battery and when the tool comes
handled or transported. Transport the tool with the switch in position
ON and your nger on the trigger can cause danger of accidental actuation.
12. Remove all keys and repair tools before turning on
the switch. A wrench attached to moving parts can cause injury.
13. Don't go out of balance. Maintain the correct body balance in each
situation. This allows better control of the tool in case of unexpected events.
24