Monitor Audio WS-10 Mode D'emploi page 9

Specification
System Format
Low Frequency Limit
Amplifier Power Output
Maximum SPL
Amplifier Classification
Bass EQ Switch
Phase Control
Auto Sensing
Auto Standby
Driver Compliment
Input Impedance
Mains Input Voltage
Dimensions (H x W x D)
(Horizontal Inc feet)
Dimensions (H x W x D)
(Vertical Inc feet)
Connections
12v Trigger Input
Power Consumption
Weight (unpacked)
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it
does not require a safety connection to electrical earth.
Monitor Audio reserves the right to alter specifications without notice.
monitoraudio.com
WS-10
Active sub-woofer system – Dual HiVe Bass Reflex Port.
18mm MDF cabinet (CARB2 approved)
40Hz (-6dB)
100W @ < 1% THD+N
105dBA (@1m)
Class D amplifier with Switch mode power supply (SMPSU)
Music/ Movie/ Impact
0 & 180 degrees
LFE Input <2mV
Auto wireless audio input signal detection
After approximately 20 minutes if no signal sensed
Wireless audio source turned off
1 x 8" (200mm) C-CAM
> 20K Ohms
AC 90-264V ~ 50/60Hz
(Auto Ranging)
175 x 375 x 480mm
6 x 14 x 18
7/8 3/4
375 x 140 x 480mm
14 x 5 x 18
3/4 1/2
2.4GHz Wireless receiver, LFE in,
12v Trigger in (3.5mm mono mini-jack)
5 - 12v via 3.5mm mono mini-jack socket
Standby: < 0.5W (ErP approved)
Typical Idle: < 10W
Max Rated: 100W
9.70Kg (21lb 6oz)
long throw driver.
®
Inches
7/8
Inches
7/8
7