Publicité
Les langues disponibles
Les langues disponibles
EN
6.
Replace the fuel cap and the cap on the
container and firmly tighten.
7.
Clean the area around the fuel cap.
8.
Check that the tank and fuel lines are not
leaking fuel.
FIG. 11
STARTING THE ENGINE
1.
Put the engine switch in the ON position.
FIG. 12
2.
Move the choke lever to closed position
.
FIG. 13
3.
Press the fuel pump bulb 7–10 times.
FIG. 14
4.
Hold the product firmly with one hand on
the handle.
5.
Pull the starter cord slowly until it catches
(6-15 cm).
6.
Then pull the cord quickly several times
until the engine starts.
FIG. 15
7.
When the engine has started, wait a few
seconds and put the choke in the open
position
FIG. 16
8.
Allow the engine to idle for 1-2 minutes to
warm up before starting to work.
IMPORTANT:
•
If the cord is pulled repeatedly with the
choke closed the engine can flood and
be difficult to start.
•
If the engine gets flooded, remove the
spark plug and carefully pull the starter
cord to remove any excess fuel. Wipe the
electrodes on the spark plug, and
replace.
44
.
WARM START
Do as follows to start a warm engine:
1.
Put the engine switch in the ON position.
2.
Press the fuel pump bulb 7-10 times.
3.
When the engine has started, wait a few
seconds and put the choke in the open
position
.
HOW TO USE
•
Adjust the engine speed to the work to be
done. The speed of the engine is
controlled with the throttle (4) on the top
handle.
•
The throttle can be locked with the
throttle lock (5).
FIG. 17
Running-in
Do not run the engine at full power during the
first 6-8 working hours.
Switching off
1.
Bring up the lock (5).
2.
Release the throttle (4).
3.
Put the engine switch in the 0 position.
IMPORTANT:
•
During prolonged use the vibrations can
cause circulation problems in the hands.
•
Use appropriate, comfortable clothing
when using the product.
•
The choke returns automatically. When
the throttle is pressed to increase the
speed of the engine the chock
automatically returns to the open
position
.
•
Pay attention to the surroundings and
avoid causing any interference.
Publicité
