Télécharger Imprimer la page

Meec tools 021332 Mode D'emploi page 43

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 70
Recommended fuel for product is
unleaded petrol of at least 90 octane.
Oil
Use good grade 2-stroke oil.
Mix 40 parts of petrol to 1 part of oil
(corresponding to an oil mixture of 2.5%).
IMPORTANT:
Never use oil intended for 4-stroke engines,
or for water-cooled 2-stroke engines.
Do not use pure petrol with the additive
of 2-stroke oil; this will damage the
engine and invalidate the warranty.
Use good grade petrol and oil for best
functionality and life span.
Petrol is a perishable product. Do not buy
more petrol than you can use in 30 days.
MIXING AND HANDLING FUEL
WARNING!
Petrol is highly flammable and can in
some circumstances be explosive.
Transport and store fuel only in
approved containers, at a safe distance
from naked flames, sparks and other
sources of heat.
Store fuel out of the reach of children.
Do not smoke when refuelling. Avoid
inhaling fumes from fuel.
Fuel mix table
Petrol
2-stroke oil
litre
litre
1
0.025
2
0.05
3
0.075
5
0.125
10
0.25
cm³
25
50
75
125
250
Fuel mix
1.
Pour about half of the petrol in the mixing
container.
2.
Add 2-stroke oil as per the table.
3.
Add the rest of the petrol.
4.
Put the lid on and carefully shake.
IMPORTANT:
Fuel mixed with oil that has stood for
more than one month can contaminate
the carburettor and prevent the engine
from working properly.
Store mixed fuel and pure petrol
separately in labelled containers to
avoid the risk of mistakes.
Clean containers for petrol and mixed
fuel at regular intervals to remove any
deposits.
Refuelling
WARNING!
Do not smoke when refuelling. Avoid
inhaling fumes from fuel.
Open the fuel cap carefully, there can be
overpressure in the fuel tank.
Screw the fuel cap on firmly.
Wipe off any spilled fuel and allow the
residue to evaporate before starting the
engine.
1.
Place the product on a level, stable
surface with the fuel cap up.
2.
Clean the fuel cap and the area around
the opening to avoid impurities getting
into the tank.
3.
Open the fuel cap slowly to relieve any
overpressure.
4.
Shake the container with the fuel mix.
5.
Carefully pour the fuel in the tank. Use
a funnel. Do not fill more than to the
bottom edge of the filler tube, so that the
fuel can expand.
EN
43

Publicité

loading