Meec tools 021332 Mode D'emploi page 41

TECHNICAL DATA
Engine type
Output
Displacement
Suction power
Air flow
Catcher
Fuel tank volume
Sound pressure level, LpA
Measured sound power level, LwA
Guaranteed sound power level, LwA
Uncertainty K (LwA)
Vibration level
Weight
As blower with nozzle: 4.6 kg
Always wear ear protection!
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and
for a preliminary assessment of exposure.
The measurement values have been determined
in accordance with EN 15503:2009.
WARNING!
The actual vibration level when using power
tools may differ from the specified maximum
value, depending on how the tool is used.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
1. Engine unit
Two-stroke
0.9 kW
25.4 cm³
18.5 N
950 m³/h
50 l
400 ml
93.6 dB
106.6 dB
110 dB
3 dB
5.62 m/s², K=1.5 m/s²
In suction mode: 5.8 kg
2. Top handle
3. Suction tube fastener
4. Throttle
5. Throttle lock
6. Clamping screw on engine housing air
sleeve
7. Blowpipe 1
8. Blowpipe 2
FIG. 1
9. Suction tube 2
10. Suction tube 1
11. Air filter cover
12. Power switch
13. Choke lever
14. Starter
15. Elbow
16. Bag
17. Fuel tank
18. Air filter knob
19. Fuel mix container
20. Spark plug spanner
FIG. 2
ASSEMBLY
The product is intended to be used for blowing
and suction. Unpack and assemble the product
on a level and stable surface where there is
enough space. Use suitable equipment.
BLOWER FUNCTION
Fit the blowpipe 1 on the air outlet
on the engine unit.
1. Remove the retaining screw from the air
outlet.
2. Align the mounting lug on the blowpipe 1
(7) to the holder on the air outlet.
3. Push in blowpipe 1 (7) as far as it goes.
FIG. 3
EN
41