Miltenyi Biotec MACSxpress Separator Mode D'emploi page 12

• Do not use bleach.
• Use only specified sample container.
• Follow the protocol in the respective data sheet.
• Process maximal 30 mL of blood product sample in one isolation step.
• Do not pour off the supernatant, as the tube will fall out of the MACSxpress
• If parts of the instrument are damaged, unplug and do not use the
1
• Follow local regulations regarding waste disposal.
• Autoclave or decontaminate waste with an appropriate disinfectant.
• Follow the general laboratory safety regulations when handling liquid and
• All safety measures in section
• Use any substances and reagents only as stated in the respective data sheet.
• Operate the instrument in a fume hood if hazardous substances and reagents
• Only use reagents provided by Miltenyi Biotec if not otherwise stated in this
10
Sample processing
Incorrect sample processing may lead to contamination or infection.
Separator.
Equipment damage
Defective or inadequate equipment can cause a biological hazard.
instrument until damaged parts are replaced. Contact Miltenyi Biotec
Technical Support, if necessary.
Waste
All liquid and solid waste must be considered hazardous.
solid waste.
Chemical hazards
CHEMICAL HAZARD
Substances and reagents can be hazardous.
hazardous substances and reagents that may be present in the sample.
are processed.
manual.
Biological hazards
also apply to any