MSW Motor Technics MSW-TRB-300 Manuel D'utilisation page 4

Biegeanleitung:
1. Ziehen Sie den Griff gemäß dem Pfeil in der
Zeichnung.
2. Setzen Sie die Bewegung fort, bis Sie die im Bild
gezeigte Position erreichen.
3. Entfernen Sie den Stift 7/8 ''. Drehen Sie den
Schwenkarm gegen den Uhrzeigersinn (achten
Sie darauf, das Rohr nicht zu bewegen). Setzen
Sie den 7/8-Zoll-Stift ein und wiederholen Sie den
Biegevorgang, bis der gewünschte Winkel erreicht
ist.
6
Achtung: Beim Biegen eines Rohrs über 120 ° kann ein Rohr
in der Maschine stecken bleiben. Um das Rohr zu lösen,
entfernen Sie zuerst den Stift, der den Gurt blockiert, und
klopfen Sie dann vorsichtig auf das Rohr. Dies erleichtert
das Entfernen.
3.4. REINIGUNG UND WARTUNG
• Hebel und Sperrelemente in sauberem Zustand, ohne
Rückstände von chmierstoffen halten.
• Drehelemente und/oder Kontaktoberfläche zyklisch
schmieren.
• Verwenden Sie zum Reinigen der Oberfläche
ausschließlich Mittel ohne ätzende Inhaltsstoffe.
• Lassen Sie nach jeder Reinigung alle Teile gut trocknen,
bevor das Gerät erneut verwendet wird.
• Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
• Wenn das Gerät für einen längeren Zeitraum nicht
verwendet werden sollte, soll es für die Lagerungszeit
mit Schmierfett behandelt werden. Um eine sichere
Nutzung zu garantieren, das überflüssige Schmierfett
vor erneutem Gebrauch entfernen.
Rev. 06.07.2020
U S E R M A N U A L
TECHNICAL DATA
Parameter description Parameter value
Product name TUBE ROLLE BENDER
Model MSW-TRB-300
Dimensions [mm] 1550x550x1090
Weight [kg] 66,6
Working angle [°] 0-130
Workpiece thickness [mm] 1,5-4
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear protective gloves.
Wear foot protection.
CAUTION! Sharp elements. Limb cut hazard.
ATTENTION! Danger of hand crushing.
Only use inside.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to TUBE ROLLE BENDER.
Rev. 06.07.2020
2.1. SAFETY AT THE WORKPLACE
a) Make sure the workplace is orderly and well
lit. A messy or poorly lit workplace may lead to
accidents. Try to anticipate what may happen,
observe what is going on and use common sense
when working with the device.
b) This device is not intended to be used by persons
(including children) with limited physical, sensory
or mental aptitude or lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or have received
instruction from this person as to how the device is
used.
c) This device is not intended to be used by persons
(including children) with limited physical, sensory
or mental aptitudes or lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or have received
instruction from this person as to how the device is
and
used.
d) This device may be operated by physically fit persons
who are properly trained and able to handle the
device and who reviewed this operating manual and
received training in occupational health and safety.
e) In case of doubt whether the product operates
correctly or finding damage please contact the
service centre of the manufacturer.
f) Only the service centre of the manufacturer can
make repairs of the product Do not attempt to make
repairs yourself!
g) Children or unauthorised persons are forbidden
from entering a work station. (A distraction may
result in a loss of control over the device).
h) During workpiece working, take care of strangers
and their safety.
i) Observe the workpiece carefully during working to
avoid its damage and prevent any possible hazard.
j) Maintain order and remove any dust, debris and
waste material after working.
k) If more elements are manufactured, they should be
stored in such a way before and after working that
allows keeping order at the workstation.
REMEMBER! When using the device, protect
children and other bystanders.
2.2. PERSONAL SAFETY
a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which can
significantly impair the ability to operate the device.
b) When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
c) Use personal protection equipment as required for
working with the device, specified in section 1 (Legend).
The use of correct, approved personal protection
equipment reduces the risk of suffering an injury.
d) Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
e) Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
f) Before device operation, remove all regulating tools
or wrenches. Any tool or wrench left inside a rotating
part of the device can result in injuries.
7