Maintenance And Inspections; Warranty; Terms And Conditions - pewag winner profimag PMA Serie Traduction Du Mode D'emploi

8. Maintenance and Inspections

To grant a proper working process and a product long life , it is necessary to do some check. To assure functionality
and the best features for all life long, follow the inspection schedule (for more detailed informations consider ASME
B30.20):
1) Initial inspection: New and reinstalled lifting magnets shall be inspected by a designated person prior to initial use
to verify compliance with the datas from the manufacturer.
2) Every lift inspection: Lifting magnets shall be visually examined by the operator before each lift for any indication
of damage and observed during operation for any damage that might occur.
• Lifting magnet face and surface of the load for foreign materials and smoothness
• Condition and operation of the control handle and the safety lock
• Condition and operation of the master link
• Legibility of the label
E 3) Periodic inspection: lifting magnets shall be inspected periodically according following table.
General state cleaning
Lever lock check
Latch stroke check
Nucleus fluidity check
Polar surface state check
Labels check
Master link check
Full inspection and testing
• For cleaning use a dry and clean fabric.
• Periodic Inspection operations and repair must be arranged by expert personnel.
• Annual check must be registered and attached to this manual.
• For any further questions please contact pewag.

9. Warranty

pewag austria GmbH grants end users a 5-year warranty for their lifting magnets. This warranty is valid only for
the original end user of the lifting magnet, provided that all inspection and maintenance activities were performed
in compliance with the manufacturer's instructions throughout the warranty period. The warranty period shall be 5
years from the date of purchase and is subject to the terms and conditions outlined below.

10. Terms and conditions

The warranty covers only such defects as result from manufacturing faults and occur during normal use. Defects
such as wear and tear of parts, e.g. label, lever, handle, suspension ring etc. shall be excluded from the warranty. If
a defect is detected during the warranty period, the lifting magnet shall be replaced or repaired at the manufacturer's
discretion.
16
Inspection frequency
daily weekly monthly annual