Tria POSITIVELY CLEAR LUMIERE BLEUE ANTI-ACNE Instructions D'utilisation page 26

TABLE 3 – GUIDANCE AND MANUFACTURER'S DECLARATION – ELECTROMAGNETIC IMMUNITY
The Positively Clear Acne Clearing Blue Light is intended for use in the electromagnetic environment specified below. The
customer or the user of the Positively Clear Acne Clearing Blue Light should assure that it is used in such an environment.
IMMUNITY TEST
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
TABLE 4 – RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE RF
COMMUNICATIONS EQUIPMENT AND THE POSITIVELY CLEAR ACNE CLEARING BLUE LIGHT
The Positively Clear Acne Clearing Blue Light is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the Positively Clear Acne Clearing Blue Light can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the Positively Clear Acne Clearing Blue Light as recommended below, according to the
maximum output power of the communications equipment.
MAXIMUM
OUTPUT POWER
W
0,01
0,1
1
10
100 26
IEC 60601 TEST LEVEL
3 Vrms
150 kHz to 80 MHz
3 V/m
80 MHz to 2.5 GHz
SEPARATION (M)
150 KHZ TO 80 MHZ
D = (3.5/V1)(SQRT P)
0.11667
0.36894
1.1667
3.6894
11.667
COMPLIANCE LEVEL
(V1)=3Vrms
(E1)=3V/m
SEPARATION (M)
80 MHZ TO 800 MHZ
D= (3.5/E1)(SQRT P)
0.11667
0.36894
1.1667
3.6894
1 1.667
ELECTROMAGNETIC
ENVIRONMENT - GUIDANCE
Portable and mobile RF
communications equipment should
be separated from the Positively
Clear Acne Clearing Blue Light
by no less than the distances
calculated/listed below.
D=(3.5/V1)(Sqrt P)
150kHz to 80MHz
D=(3.5/E1)(Sqrt P)
80 to 800 MHz
D=(7/E1)(Sqrt P)
800 MHz to 2.5 GHz
where P is the max power in
watts and D is the recommended
separation distance in meters.
Field strengths from fixed
transmitters, as determined by an
electromagnetic site survey, should
be less than the compliance levels
(V1 and E1).
Interference may occur in the
vicinity of equipment containing a
transmitter.
SEPARATION (M)
800 MHZ TO 2,5 GHZ
D = (7/E1)(SQRT P)
0.23333
0.73785
2.3333
7.3785
23.333