Additional Functions; Remote Control; Description Of Symbols - steel Genesi Manuel D'utilisation

Instructions for the user
How to activate:
Press at the same time the push buttons
If you press the push button
the motor 2→3→1→2 ...;
Press at the same time the push buttons
interval function will be activated.
Deactivate: you can deactivate pressing any push button but not the light push button.
5.2

Additional Functions

5.2.1 Remote control

LIGHT ON/OFF/DIMMING
INCREASE FAN LEVEL
REDUCE FAN LEVEL
INTERVAL VENTILATION
FAN RUN-ON
5.2.1.1 Switching on
1. Press the button.
The fan starts.
2. Press the or button to set a different fan level.
5.2.1.2 Switching off
Press the button until the appliance switches off.
5.2.1.3 Intensive setting
You can use the intensive setting if there is a large build-up of odours and fumes/vapours.
Press the button until you hear the appliance switch into intensive mode.
The run time of the intensive mode is 4 minutes. Once this time has elapsed, the appliance
switches back to fan level 2.
and , then release them: the display will show 1;
, the display will show the following numbers for the speeds of
and

DESCRIPTION OF SYMBOLS

to confirm the speeds at which the
27