Luminance Brands kathy ireland HOME AMHURST LED Mode D'emploi page 8

3. Ceiling Fan Assembly
(Continued)
3.8
GREEN GROUND WIRE
Carefully rotate the partial assembled Ceiling Fan and
place gently into the styrofoam to compete the final
PIN
installation of the Fan .
GREEN GROUND WIRE SCREW
DOWNROD
3.9
Remove the Hanger Ball by loosening the Set Screw
in the Hanger Ball until the Ball falls freely down the
Downrod (Figure 7) .
HANGER BALL
PHILLIPS HEAD SET SCREW (LOOSENED)
Remove the Pin from the Downrod, then remove the
Hanger Ball .
Figure 7
Retain the Pin and Hanger Ball for reinstallation in
Step 3 .16 .
NOTE: Do not loosen the Screw holding the Green
Ground Wire.
3.10
THREE 80" MOTOR WIRES
THREE 80" MOTOR LEADS
(UNTWISTED)
(UNTWISTED)
Separate, untwist and unkink the Three 80" Motor
Wires .
Route the 80" Black, Blue and White Motor Wires
through the Downrod (Figure 8) .
4.5" DOWNROD
Figure 8
8
ETL Model No.: CF880L