Modine ECO EGK Serie Manuel Technique page 55

6. Installation conditions
6.1 The model described in this manual is a component of a system and must be installed by authorised personnel
only.
6.2 The model is fitted with axial fans that are not suitable to withstand additional static pressures and therefore it
cannot be channelled, air intake filters cannot be installed and in the area dedicated to installation there must
be no strong currents of air which are contrary to the flow of the motor fans.
6.3 Installation must be carried out preferably outside. In the event that the model is to be installed inside, it is
essential to provide an air intake that excludes any additional static pressure.
6.4 The base must be appropriate to the weight of the model when operational (see the drawing supplied with the
model).
6.5 The equipment must be securely anchored to the support base, use all the fixing points. In order to prevent the
transmission of noise. Possibly use shock absorbers.
55
www.modinecoolers.com