Regulatory Information
Safety Notices - Take some time to read through the safety notices before installing the AXIS OfficeBasic USB Wireless G.
Please observe all safety markings and instructions when using this product.
Important!: - must be observed to avoid operational impairment. Do not proceed any of the above notices, until you have
fully understood the implications.
Radio Transmission Regulatory information - Tested to comply with FCC Standards FOR HOME OR OFFICE USE.
This product must be installed and used in strict accordance with the instructions given in the user documentation. The AXIS
OfficeBasic USB Wireless G complies with the following radio frequency and safety standards:
Europe - This digital equipment fulfils the requirements for radiated emission according to limit B of EN55022, and the
requirements for immunity according to EN55024 residential, commercial, and light industry.
Technical requirements for radio equipment according to EN 300 328-1 (2001-12) and 300 328-2 (2001-12)
USA - Federal Communications Commission FCC. This device complies with Part 15 of FCC Rules. Operation of the device is
subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference that may cause undesired operation.
Important! - The channel must be set according to the radio frequency requirements in your country:
Japan - This is a class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
Liability - Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please
inform your local Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held
responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals
without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within
this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the
furnishing, performance or use of this material.
Safety: EN60950
Trademark Acknowledgments - Apple, Ethernet, Macintosh, Microsoft, Rendezvous, Windows, are registered trademarks of
the respective holders.
Software Acknowledgments - This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit.
Support Services - Should you require technical assistance, please contact your Axis dealer. If your questions cannot be
answered immediately, your Axis dealer will forward your queries through the appropriate channels to ensure you a rapid
response. If you are connected to the Internet, you can find on-line manuals, technical support, software updates, application
software, corporate information, etc. at http://www.axis.com/techsup
Part nr 23556 r1.0
3