Axis OfficeBasic USB Wireless G Guide De L'utilisateur page 12

7. On the TCP/IP Settings screen, specify a fixed IP address,
netmask and gateway for the print server (highly recommended)
or use a dynamic IP address. Click Next.
8. Check the settings in the Save Settings screen before they are
uploaded to the print server.
It is possible to verify the identity of the print server by comparing the public
key in the Save Settings screen with the test page.
If the settings in the print server do not match those in the Access Point,
communication with the print server may be lost. If this happens, reset the print
server and start over.
9. Continue by installing a printer, see Installing a printer, on page
18.
12