Throttle Range Explanation - Carson Virus 4.1 4S Brushless Mode D'emploi

1
Click SET key
Green LED flashes for 1 time

THROTTLE RANGE EXPLANATION

LED status of normal running
• In normal use, if the throttle stick is in the neutral range, neither
the red LED nor the green LED lights.
• The red LED lights when the car is running forward or backward
and it will flash quickly when the car is braking.
• The green LED lights when the throttle stick is moved to the top
point (end point) of the forward zone or backward zone.
2
Click SET key
Green LED flashes for 2 times
Alert tones
• Alert tone input voltage abnormal: The ESC begins to check the
input voltage when power on. If it is out of the normal range, such
an alert tone will be emitted: "beep-beep-, beep-beep-, beep-
beep-" (There is 1 second time interval between every "beep-
beep-" tones).
• Alert tone throttle signal abnormal: When the ESC can't detect
the normal throttle signal, such an alert tone will be emitted:
"beep-, beep-, beep-" (There is 2 seconds time interval between
every "beep-" tones).
Protection function
1. Low voltage cut-off protection: If the voltage of a lithium battery
pack is lower than the threshold for 2 seconds, the ESC will cut of
the output power. Please note, that the ESC cannot be restarted if
the voltage of one lithium cell is lower than 3.2 V.
2. Over-heat protection: When the temperature of the ESC is over
a factory preset threshold for 5 seconds, the ESC will cut off the
output power. When the over-heat protection happens, the green
LED will flash in such a style: „ * , * , * " (single flash).
3. Signal loss protection: The ESC will cut off the output power if the
throttle signal is lost for 0.2 second.
3
Click SET key
Green LED flashes for 3 times
27 // GB