BH ATOM Manuel page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
USER MANUAL
4.2.5 Battery Level Indicator.
The battery level indicator shows the estimated remaining battery capacity.
In order to increase the life of the battery and prevent a full discharge which
may damage it, the assistance modes are limited based on the state of
charge of the battery:
Battery with charge above 20%: It is available 100% of maximum
assistance level.
NOTE
Battery with charge of 10-20%: Assistance level is limited to 50% of
maximum assistance.
Battery with charge of 5-10%: Assistance level is limited to 25% of
maximum assistance.
Battery with charge of 1-5%: : Assistance is not allowed. Only light
can be turned on.
4.2.6. Settings Menu
The user can access the settings menu by holding down the (+) and (-) buttons for 3 seconds.
Press the (+) and (-) buttons to scroll through the different settings options. When you press the POWER button, 
you will enter the selected menu. Additionally, the system will exit the settings menu when the user holds down
the POWER button for 3 seconds.
When making any adjustments, make sure that you stop the bicycle
and perform them in a safe place. Otherwise, the lack of attention to the
WARNING
surrounding traffic could cause an accident.
A) Resetting the trip information.
The user can view and reset the trip information at any time.
B) Selecting secondary information on the screen.
The user can select the information that will be shown on the screen's secondary information indicator.
38
ATOM & ATOMS
ATOM & ATOMS
C) Start-up profile.
The user can select the system start-up settings. Every time that the user turns the display panel on and off,
the system will change the settings to those selected on this menu:
Secondary information
Assistance mode
Auto power-off
Sets the display's
auto power-off time.
D) Screen brightness
selection.
The user can alter the brightness
of the screen so that they can
view it correctly.
USER MANUAL
Lighting system.
This operates according to the
display panel's brightness sensor.
E) Metric and imperial
F) Battery status.
systems.
On this menu, the user can view
The user can switch between the
the state of deterioration of the
metric system (kilometres) and
battery and manage the bike's
imperial system (miles).
assistance modes.
EN
39

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Atoms

Table des Matières