11
21
Please install the child restraint on the rear vehicle seat, and then put the
child in the child restraint.
Please adjust the child restraint to the desired recline position (2 positions
for rearward facing mode). Align the top reclining indicator with one of the
bottom blue triangles.
Make sure the shoulder harness is adjusted to proper height before
installing this child restraint.
When installing and adjusting the safety belts, make sure that both the
shoulder belt and the waist belt are not twisted and will not stop the safety
belts from functioning properly.
1.Pass the vehicle waist belt through the vehicle waist belt slots, then
engage the vehicle buckle tongue into the buckle.
9
11 12
2. Pass the vehicle shoulder belt through the two rear-facing vehicle belt slots
at the back of the car seat.
13
Open the belt lock off and insert the shoulder belt through it.
Ensure the belt lock off cover is completely closed when not in use to
prevent injury, or damage to vehicle upholstery.
3. Press the child restraint down firmly
and pull the vehicle shoulder belt to
fasten the child restraint securely.
Ensure to close the lock-off after you
are done checking the child restraint
is securely fastened.
15
The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
Double check that the child restraint
is securely installed and does not
move on the vehicle seat.
14
15
1
10