Lexmark C510 Guide D'installation page 45

Using Windows 98
with USB or
parallel cable
Note:
Depending on the
software and printers
already installed on your
computer, your screens may
vary from those in the
instructions.
7
Use the default printer name or type a unique name for your
printer, and then click Next.
8
Click Yes (recommended), and then click Finish to print a test
page.
9
After the test page prints, click Yes to close the window.
10
Click Finish to complete the installation and close the wizard.
You are now ready to print.
You must install both a USB port driver and an enhanced custom print
driver.
When the Add New Hardware Wizard screen appears:
1
Insert the drivers CD, and then click Next. If the CD auto
launches, exit the CD.
2
Select Search for the best driver for your device
(recommended), and then click Next.
3
Select only CD-ROM drive, and then click Next.
4
After the wizard finds the USB port driver, click Next.
5
After the USB port driver is installed, click Finish.
6
Click Next.
7
Select Search for the best driver (recommended), and then
click Next.
8
Select to Specify a location.
9
Browse to the location of the printer driver on the drivers CD:
D:\Drivers\WIN_9X\english
10
Click OK.
11
After the printer driver is found, click Next.
12
Use the default printer name or type a unique name for your
printer, and then click Next.
13
Select Yes to print a test page, and then click Finish. All the
necessary files are installed on your computer.
14
After the test page prints, click Yes to close the message
window.
Install drivers for local printing
39