Lexmark C510 Guide D'installation page 41

Turning your
printer on
Follow these instructions to turn your printer on.
1
Plug one end of the printer power cord into the socket at the
back of the printer and the other end into a properly grounded
outlet.
2
Turn on the printer.
After the printer completes its internal tests, the Ready
message indicates that the printer is ready to receive jobs.
If you see a message other than Ready on the display, refer to
the publications CD for instructions on clearing the message.
Click Printing, and then click Understanding printer
messages.
3
If you have attached your printer locally, turn on your computer
and any other peripherals.
What do I do next?
For connection type...
Local attachment
Network attachment
Attach cables
35
Go to...
"Install drivers for local printing" on page 36
"Verify printer setup" on page 44