InnoCigs REULEAUX RX GEN3 Mode D'emploi page 58

STEAMAX RX GEN3 – OPERATING AND SWITCHING OPERATING MODES
Switching between Operating Modes
Press the Fire button five times to switch on the device and then three times to enter the main menu and see your current vaping mode.
Press the right Setting button to switch between POWER (VW mode), TEMP (TC-Ni, TC-Ti, TC-SS316) and TCR (M1, M2, M3) modes. Press the
fire button to confirm your current selection. When TEMP starts to blink, press the left Setting button to enter the submenu and here you
can switch between TC-Ni, TC-Ti, and TC-SS31 by pressing the right button. When TCR blinks, press the right button to select between M1,
M2, M3 in TCR mode.
Setting the TCR Mode (M1, M2, M3)
While the device is switched off, press the Fire button and the right Setting button simultaneously for a few seconds to enter
the TCR menu:
1. Press the left or right Setting button to switch between TCR M1, M2, and M3.
2. Press the Fire button to confirm the selected mode.
3. Press the left or the right Setting button to change the values corresponding to the coil of the head used.
4. Hold down the Fire button or wait 10 seconds to confirm the settings.
55
www.steamax.com