JVC DLA-RS67 Instructions page 53

Pixel Adjust
Adjust
For setting the adjustment feature to On (Memory 1 or Memory 2) or Off.
* You can save the settings separately when an anamorphic lens is used and when you are using the projector with
a screen.
Adjust Area
Setting
Whole
Zone
Adjust Color
For selecting the color to adjust ("Red" or "Blue").
Adjust Pattern Color
For setting the adjustment pattern color to "White" or "Yellow / Cyan".
Adjust(Pixel)
When "Adjust Area" is set to "Whole", adjustment can be made by moving in units of one pixel on the screen of the color
selected in "Adjust Color".
Æ "Whole Adjust (Pixel) Operation Procedure" （p. 55）
* Adjustment cannot be made when "Adjust Area" is set to "Zone".
Setting
H (Horizontal)
V (Vertical)
Adjust(Fine)
When "Adjust Area" is set to "Whole", adjustment can be made by moving in units of 1/16 pixel on the screen of the
color selected in "Adjust Color".
Æ "Whole Adjust (Fine) Operation Procedure" （p. 56）
When "Adjust Area" is set to "Zone", the screen is divided into 11 vertical x 11 horizontal zones, and fine adjustment of
each zone is possible.
Æ "Zone Adjust Operation Procedure" （p. 57）
Setting
H (Horizontal)
V (Vertical)
Reset
Restores all pixel adjustment data to the factory default.
Adjusts the entire image.
Enables fine adjustment of each zone by dividing the screen into 11 vertical x 11
horizontal zones.
Setting range: -2 (moves red/blue to the left) to +2 (moves red/blue to the right)
Setting range: -2 (moves red/blue downward) to +2 (moves red/blue upward)
Setting range: -31 (moves red/blue to the left) to +31 (moves red/blue to the right)
Setting range: -31 (moves red/blue downward) to +31 (moves red/blue upward)
Description
Description
Description
53