JVC DLA-RS67 Instructions page 33

Viewing 3D Movies
Connect this unit to a 3D-compatible
HDMI device, and turn on the power
1
to play back the 3D video image
For details on how to play back 3D video images,
0
please refer to the instruction manual of the
player or recorder in use.
When 3D signals are received, the video image
0
switches automatically to the 3D format.
This unit supports the following 3D formats.
0
- Frame packing
- Side-by-side
- Top-and-bottom
In the default setting, "3D Format" is set to "Auto"
0
for automatic projection of 3D images.
If the image does not switch to 3D automatically
A Press the [3D SETTING] button to
display "3D Setting"
B Select "3D Format"
V: Press the [3D FORMAT] button on the remote
control
.
INPUT
Pressing the [3D FORMAT] button each time
0
switches the mode in the following sequence:
"Auto"""Side by Side"""Top and
Bottom"""2D"""Auto"...
You can also perform setting from "Input
0
Signal"""3D Setting"""3D Format" in the
menu.
Format
Auto The format is detected and
configured automatically.
Side by Side Select this setting if the 3D input
signal is of the side-by-side
format.
Top and Bottom Select this setting if the 3D input
signal is of the top-and-bottom
format.
2D Select this setting if 2D images
are falsely recognized as 3D
ones.
Turn of the power of the 3D GLASSES
2
and put them on
The PK-AG1 powers on automatically.
0
Description
33