JVC DLA-RS67 Instructions page 23

Connecting to the LAN Terminal
This Unit
To [LAN] Terminal
.
The network is used to control this unit. It is not used for sending or receiving video signals.
0
Please contact your network administrator for information concerning the network connection.
0
Set "ECO Mode" to "Off" if RS-232C/LAN communication is performed or the HDMI link function is used in the Standby
0
mode. (p. 59)
For more information on control, please refer to "External Control" (p. 70).
0
Connecting to the RS-232C Terminal
This Unit
To [RS-232C] Terminal
RS-232C Connection Cable (Sold Separately)
.
Set "ECO Mode" to "Off" if RS-232C/LAN communication is performed or the HDMI link function is used in the Standby
0
mode. (p. 59)
For more information on control, please refer to "External Control" (p. 70).
0
Connection Cable
(Sold Separately)
Desktop PC, etc.
Network
Laptop, etc.
RS-232C Terminal
Hub
Server
23