Assembling The Monitor; To Assemble The Monitor; To Disassemble The Monitor - Eneo VM-17PD Mode D'emploi

Assembling the monitor

The monitors are designed for use on a desktop. The arm of the monitor stand is shipped
preinstalled on the monitor.

To assemble the monitor

1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing
downwards.
2. Insert the arm of the monitor stand of the monitor into the pedestal foot provid-
ed. See figures below.

To disassemble the monitor

1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing
downwards.
2. Shrapnel with fingers or similar objects hold the base below , carefully detach the
supporting arm from the foot by pressing the groove on the back of the support-
ing arm. (Note that the fixation point can be broken if too much force is applied).
See figures below.
8