Gemini 1D002554 Mode D'emploi page 8

PIAGGIO ALARM MOD. 1D002554
ALARM SYSTEM OPERATION DESCRIPTION
The alarm system can be operated as follows:
 PIAGGIO 4‐button remote control (see description below).
 PIN code entered via the ignition key to emergency override the system.
PIAGGIO remote control functions:
BUTTON 1 operates the alarm system:

+15OFF: Arming/disarming.

+15 ON: BUTTONS 1 & 2 are pressed
simultaneously to enter in
customization mode.
BUTTON 3 operates modules output and
seat/topcase release actuator:

+15 OFF and system disarmed:
Activates the seat/topcase actuator.
The present device complies with Directive 2014/53/EU and UN/ECE R10 Rev.5. The complete text
of the EU declaration of conformity is available at the following internet address:
www.geminitech.it
Waste Electrical and Electronic Equipment (WEEE):
The present device falls within the field of application of the current WEEE Directive. The crossed‐
out wheeled bin symbol on the equipment or on its packaging indicates that the product, at the
end of its useful life, must be discarded separately from other waste to allow adequate treatment
and recycling.
The user must therefore take the equipment, at the end of its useful life, to an appropriate waste
collection facility. The complete text is available at the following internet address:
www.geminitech.it
OPERATING INSTRUCTIONS
DECLARATION OF CONFORMITY
Thank you for choosing a PIAGGIO original accessory to install
on your motorbike. Before operating your original PIAGGIO
BUTTON 2 operates the siren:

+15 OFF: Panic alarm (with system disarmed or
armed).

+15 OFF system armed during entry delay:
Exclusion of siren sound.

+15 ON: BUTTONS 1 & 2 are pressed
simultaneously to enter in customization
mode.
BUTTON 4 operates the programmable functions:

+15 OFF system armed during arming delay:
Exclusion of tilt sensor.
accessory, carefully read the following instructions.
8/39