Bitron Video AV2850/50 Manuel D'instructions page 5

3. Connect the cables to the terminal pins present on the bracket.
4. Fit the monitor on the bracket by using the tabs on the monitor left side and then turn it and fi x it with
the automatic locking tabs.
5. The monitor protection fi lm must be removed by the fi nal user.
6. To remove the monitor from the bracket, press on the tab as shown in the fi gure and make the inverse
movement.
FLUSH MOUNTING INSTALLATION
1. The sleeve for the system wiring must reach the fl ush mounting box hole. The suggested distance from
the fl oor is from 1,48 to 1,52 m.
2. Mount the fl ush mounting box observing overall dimensions.
3. After painting operations, fi x the frame to the fl ush mounting box with 4 fi xing screws 2,9 x 13mm.
8
4. Cut with side cutters the three fi xing points of the bracket selected for the system.
5. Fix the bracket to the frame with 4 screws 2,9 x 10mm.
6. Connect the terminal pins by following the instructions present in the manual provided with the
bracket.
7. Install the monitor by putting it in the frame of the fl ush mounting box.
8. Remove the upper monitor cover.
9. Fix the monitor to the bracket by using a provided screw 2,9 x 10mm
DS90360-003 DS90360-003 9