Publicité
Les langues disponibles
Les langues disponibles
3.
Connect the cables on the terminal pins present on the bracket.
4.
Fit the monitor on the bracket by using the tabs on the monitor left side and then turn it and fi x it with
the automatic locking tab.
5.
The monitor protection fi lm must be removed by the fi nal user.
6.
To remove the monitor from the bracket, press on the tab and rotate it clockwise.
FLUSH MOUNTING INSTALLATION
1.
The sleeve for the system wiring must reach the fl ush mounting box hole. The suggested distance from
the fl oor is from 1,48 to 1,52 m.
2.
Mount the AV2850/60 fl ush mounting box observing overall dimensions.
3.
After painting operations, fi x the frame to the fl ush mounting box with 4 fi xing screws 2,9x13mm.
4.
Cut with side cutters the three fi xing points of the bracket selected for the system.
12
5.
Fix the bracket to the frame with 4 screws 2,9x10mm.
6.
Connect the terminal pins by following the instructions present in the manual provided with the
bracket.
7.
Install the monitor by putting it in the frame of the fl ush mounting box.
8.
Remove the monitor upper cover.
9.
Fix the monitor to the bracket by using a provided screw 2,9x10mm
10. In order to extract the monitor from the frame, put a slotted screwdriver under the frame edge and lever
it.
DS90360-004
DS90360-004
1
2
3
13
Publicité
