Programs; Manual Mode; Warranty - Tunturi Cardio Fit M50 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
GB

Programs

Manual mode

The equipment has a manual mode, where the user is free to select
and adjust the speed level at all times. To select this mode:
- Press "Mode" button to open programming mode, display will
show P1�
- Press "Mode" button untill "-.-.-.-."is shown, as being manual
mode�
- Press "Speed +/-" buttons to set your desired speed support
mode. Default speed setting is 1.
- Press "Time" button to set your desired workout time within range
of 1~15 minutes. Default workout time setting is 10 minutes.
- Press "Start/ Stop" button to start your workout�
- Press "Speed +/-" button as you desire to set your support speed
to your desired speed at all times�
- Press "Reverse" button as you desire to set your support motion
direction at all times�
- When reached your pre set workout time, the machine will come to
a smooth stop�
Preset Programs (P1~P5)
The equipment has 5 pre-set programs with different profiles.
Each profile has a pre set profile in speed and direction variations�
- Below the table showing each pre programmed profile.
Each segment will last for 30 seconds and keeps cycling till workout
time has reached the end and machine stops smoothly�
↻ ↻ ↻ ↻ ↻ ↺ ↺ ↺ ↺ ↺
Direction
P1
Speed
1
2
P2
Speed
2
3
P3
Speed
3
5
P4
Speed
4
6
P5
Speed
5
10 5
To select your preferred profile:
- Press "Mode" button to open programming mode, display will
show P1�
- Press "Mode" button until desired profile mode is shown�
- Press "Time" button to set your desired workout time within range
of 1~15 minutes. Default workout time setting is 10 minutes.
- Press "Start/ Stop" button to start your workout�
- Press "Level +/-" button as you desire to set your support speed to
your desired speed at all times�
- Press "Reverse" button as you desire to set your support motion
direction at all times�
‼ NOTE
- When changing the speed, or running direction when being in a
pre programmed profile it will only apply the change for the active
segment you are in, and will maintain following the pre set profile
when shift to next profile segment.
- When reached your pre set workout time, the machine will come to
a smooth stop�
3
4
5
1
2
3
4
4
5
6
2
3
4
5
7
9
11 3
5
7
9
8
10 12 4
6
8
10 12
10 - -
5
10 5
10 -

Warranty

Tunturi purchaser's warranty
Warranty terms
The consumer is entitled to the applicable legal rights stated in
the national legislation concerning the commerce of consumer
goods. This warranty does not restrict these rights. The Purchaser's
Warranty is only valid if the item is used in an environment approved
by Tunturi New Fitness BV, and is maintained as instructed for that
particular equipment. The product-specific approved environment
and maintenance instructions are stated in the "user manual" of the
product� The "user manual" can be downloaded from our website�
http://manuals.tunturi.com
Warranty conditions
The warranty conditions commence from the date of purchase�
Warranty conditions may vary per country, so please consult your
local dealer for the warranty conditions�
Warranty coverage
Under no circumstances shall Tunturi New Fitness BV or the Tunturi
Distributor be liable by virtue of this warranty or otherwise for any
special, indirect, secondary or consequential damages of any nature
arising out of any use or inability to use this equipment.
Warranty limitations
This warranty covers manufacturing defects in the fitness equipment
as originally packed by Tunturi New Fitness BV. The warranty shall
apply only under conditions of normal, recommended use of the
product as described in the Owner's Manual and providing that
Tunturi New Fitness BV's instructions for installation, maintenance and
use have been complied with. Neither Tunturi New Fitness BV's nor
5
the Tunturi Distributors'
6
obligations apply to defects due to reasons beyond their control. The
11
warranty applies only to the original purchaser and is valid only in
countries where Tunturi New Fitness BV has an authorised importer�
The warranty does not extend to fitness equipment or components
that have been modified without the consent of Tunturi New Fitness
BV. Defects resulting from normal wear, misuse, abuse, corrosion, or
damage incurred during loading or transportation are not covered.
The warranty does not cover sounds or noises emitted during use
where these do not substantially impede the use of the equipment
and where they are not caused by a fault in the equipment.
The warranty does not cover defects arising from the failure to
carry periodic maintenance as outlined within the Owner's Manual
for the product. Furthermore, the warranty does not cover defects
arising from usage and storage within an unsuitable environment
as described within the Owner's Manual which should be indoors,
dry, dust and grit free and within a temperature range of +15°C to
+35°C. The warranty does not cover maintenance activities, such as
cleaning, lubricating, and normal part adjustments, nor installation
procedures that customers can accomplish themselves, such as
changing uncomplicated meters, pedals and other similar parts not
requiring any dismantling/reassembling of the fitness equipment.
Warranty repairs carried out by other than authorised Tunturi
representatives are not covered�
Failure to follow the instructions given in the Owner's Manual will
invalidate the product's warranty.
1 2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

21tcfm5000

Table des Matières