Avery Dennison FRESHMARX 9415 Guide De Référence Rapide page 8

C o n n e c t i n g t h e P r i n t e r ' s P o w e r S u p p l y
To connect the power supply to the printer:
1. Turn off the printer. Press the power switch on the side of the
printer to the off (O) position.
2. Place the power supply in a suitable location, preferably on a
table, near an electrical outlet.
3. Plug the three-hole end of the AC adapter cable into the three-
pronged outlet in the printer's power supply.
4. Plug the L-shaped end of the power supply cable into the
socket on the side of the printer.
Pow er socket
L-Shaped
Connector
5. Plug the end of the AC adapter cord into a grounded electrical
outlet.
Warning:
2
The printer and power supply should never be
operated in a location where either one can get wet.
Personal injury could result.