Aspen Pumps Hi-Flow 1 Mode D'emploi

DATA SHEET
Technical
Specification:
•
Non-return valve
•
2 metre connecting cable
•
Tank holds 1 litre or 2 litres
•
Maximum 4 metres discharge head
•
Maximum water pumping,capacity
288 litres per hour discharge
•
Pump has a pre-wired safety switch
•
Pump rating 0.6A, 230V AC
Dimensions:
1 Litre: Height: 140mm Width: 235mm
Depth: 140mm Weight: 1.7kg
2 Litre: Height: 170mm Width: 235mm
Depth: 140mm Weight: 1.75kg
Electrical Connections:
Brown: Live
Blue: Neutral
Green/yellow: Earth
2 x Black: Safety Float
Switch
DESIGNED BY ENGINEERS
FOR ENGINEERS
Aspen Hi-Flow 1 & 2 litre Tank Pump
Particularly suitable for any condition requiring the rapid
removal of condensate.
Description:
The pump is designed to collect condensated water from Air Conditioning machines
and discharge it up to recommended maximum 4 metres head. The internal safety
float is a low current switch to stop the Air Conditioning System in the event of
pump failure. The pump is operated from an internal float switch.
Installation Notes:
This pump is designed to sit level on its
base or be fitted level to a vertical
surface.
Ensure that there are no kinks or
trapped parts in the piping, which must
have an inside diameter of 6mm and an
outside diameter of 9mm.
Fix the pipe with cable ties to the pump
outlet.
Service Guide:
Flush the pump through with anti-bacterial wash every 6 months to avoid sludge
build-up in the pump housing.
NB:
The contractors should
themselves that any chemicals used are
compatible with the working of the
pump.
IMPORTANT: Pump should be filled
with water until motor runs, check for
leaks and proper discharge of water.
For further help contact Aspen Pumps:
Aspen Pumps Apex Way Hailsham East Sussex BN27 3WA UK www.aspenpumps.com
Tel: +44 (0)1323 848842 Fax: +44 (0)1323 848846 sales@aspenpumps.com
IMPORTANT: The
switch MUST ALWAYS be utilised.
300
satisfy
250
200
150
100
50
0
0 1
pre-wired safety
2 3 4
metres head