Warning - Batteries; Getting Started; Measuring Station - Hama Color EWS-1200 Mode D'emploi

3. Safety Notes
• The product is intended for private, non-
commercial use only.
• Do not operate the product outside the power
limits given in the specifications.
• Do not use the product in moist environments and
avoid splashes.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Do not place the product near interference fields,
metal frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect
the product's functionality.
• Do not drop the product and do not expose it to
any major shocks.
• Do not open the device or continue to operate it if
it becomes damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
Warning – Batteries
• Immediately remove and dispose of dead
batteries from the product.
• Only use batteries (or rechargeable batteries)
that match the specified type.
• Do not mix old and new batteries or batteries
of a different type or make.
• When inserting batteries, note the correct
polarity (+ and - markings) and insert the
batteries accordingly. Failure to do so could
result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable
batteries and keep them away from uncoated
metal objects.
Warning
• Only connect the product to a socket that has
been approved for the device. The electrical
socket must always be easily accessible.
• Disconnect the product from the network
using the power button – if this is not
available, unplug the power cord from the
socket.

4. Getting Started

4.1. Insert batteries / connect power supply

Measuring station

• Remove the screen protector from the display.
• Open the battery compartment (27) and remove
the contact breaker.
3