Hama Color EWS-1200 Mode D'emploi page 3

G Operating instruction
Controls and Displays
A Base station
1. Motion detector
2. Weather forecast
3. Time
4. Date
5. Channel display
6. Wireless symbol
7. Outdoor temperature / indoor temperature
8. Outside humidity / Indoor humidity
9. ALARM button
= display / setting alarm modes
10. LIGHT / CHANNEL / Zz button
= interrupt the alarm tone for 10 minutes /
activate backlight for approx. 10 seconds /
select channel / manual search for measuring
station signal
11. MODE / SET button
= settings / confirm the set value / switch the
display mode
12. + button
= increasing the current setting / activating/
deactivating manual radio signal reception /
Switches between TIME and temperature mode
13. AUTO – button
= decrease the current set value / auto-scroll
function
14. MEMORY-button
= accessing/ resetting the stored maximum/
minimum values
RESET
15. button
= restoring factory settings
16. Opening for wall mounting
17. Battery compartment cover
18. DC socket
19. Base
B Measuring station
20. Channel display
21. Outside temperature
2
22. Outside humidity
23. Opening for wall mounting
24. TX button
= activating manual radio signal search
°C / °F
25. button
= switching between °C and °F
26. 1 2 3 sliding switch
= channel selection
27. Battery compartment
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Color EWS-1200 Weather Station
(base station for indoors / outdoor measuring
station)
• 2 AAA batteries
• 5 AA batteries
• 230 V power supply unit
• These operating instructions