• If no entry is made for 60 seconds, setup mode
automatically exits.
• Press the ALARM button (9) repeatedly to activate
or deactivate the daily alarm. The alarm symbol
will appear or disappear accordingly.
• If the alarm is triggered, the alarm symbol
begin to flash and an alarm will sound.
• Press any button except LIGHT / CHANNEL /
Zz (10) to stop the alarm. Otherwise, it will stop
automatically after 1 minutes.
Note – Snooze function
While the alarm signal is sounding, press the
LIGHT / CHANNEL / Zz button (10) to activate
the snooze function. The alarm signal will be
stopped for 10 minutes, after which it will sound
again. The alarm symbol
6.5. Weather forecast/ atmospheric pressure
history
• Based on changes in the atmospheric pressure and
the data saved, the base station is able to make
weather forecasts for the next 12 to 24 hours.
• The weather forecast and the current weather are
indicated by five different symbols (2):
Symbol (2)
8
will
will flash.
Weather
Sunny
Slightly cloudy
• After each change of batteries or if the forecasting
is inaccurate, improve the forecast by setting
the current weather as described in 6.1 Initial
settings or 6.4 Basic and manual settings.
Note – Weather forecast
• The weather forecast function is not available
during the first few hours of operation
because it requires data that is collected
during operation.
• The weather forecast will differ in different
geographic locations, e.g. in inland versus
coastal locations. If your weather forecast
consistently fails to correctly predict the
actual weather conditions, then adjust it as
described above.
• The range of coverage is approx. 30 to 50 km.
The weather forecast is based on atmospheric
pressure changes, and has an accuracy of
around 70-75%.
6.6. Display
• Press the MODE / SET button (11) repeatedly to
switch between the following displays:
• Time
• Date
Cloudy
Rainy
Stormy
(icon flashes)