Publicité
Les langues disponibles
Les langues disponibles
User Manual
1. Before starting the installation, please ensure that all the equipment to be used (PCs,
Monitor, Speakers etc) are switched off.
2. Connect the first of your video sources to Video Input 1 using a VGA cable (HD-15 Male /
HD-15 Male) and the first of your audio sources to Audio Input 1 using a Stereo Audio cable
(3.5mm Male / 3.5mm Male).
3. Repeat step 2 to connect your second audio and video sources to the secondary inputs on
the switch.
4. Connect the Monitor Output of the switch to your monitor using a VGA cable (HD-15 Male /
HD-15 Male) and then connect the Audio Output to your speakers using a Stereo Audio
cable (3.5mm Male / 3.5mm Male).
5. Connect the Remote Control cable to the Remote control Port.
6. Turn on all the connected equipment.
7. The installation is now complete. By default Input 1 will be used for Video and Audio when
the equipment is first powered up.
The simplest way to switch between inputs is using the supplied Remote Control cable, which
will allow you to switch back and forth between inputs at the press of a button. When a device is
powered up (or restarted) the switch will automatically detect this device and switch to it.
Likewise, when a device is powered down, the switch will automatically switch to the other
device/input.
Note: Please use high quality VGA cables, to ensure best image quality we recommend our
range of VGA cables (HD-15 M / HD-15 M) which are available from www.lindy.com
English
Publicité
