Technical data
Dimensions (L x W x H):
Weight:
Materials:
IP protection class:
Mounting:
Lighting technology
Lamp luminous flux:
26
Residual luminous flux:
Colour temperature:
Colour rendering index:
Optics:
Temperature rating:
System power:
*Notes on installation
EN
4200 mm / 3000 mm / 1200 mm / 600 mm x 90 mm x 83 mm
415g 1 Light module
515g 1 Ballast
Mounting profile without fittings 4200 mm 9.1 kg, fully fitted mounting profile 4200 mm 15.4 kg
Mounting profile AL, PP, steel, PA, CU
IP 20; IP 40 with H13 002 XXX, IP 54 with H13 010 010
The luminaire in the version with degree of protection IP 54 is intended for use in an
environment in which deposition of non-conductive dust is to be expected.
The luminaire in the version with degree of protection IP 40 is intended for use in an
environment where unusual dust deposition is not to be expected.
Snap-on connection
4000 lm
3300 lm
80 % after 60,000 operating hours
optional 3,000 K (warm white), 4,000 K (neutral white) or 6,500 K (daylight white)
CRI typ. ≥80
Optics integrated in plastic covering pane:
-25 °C to 40 °C with 4000 lm
-25 °C to 50 °C with 3300 lm
max. 350W (7 x 50 W)
*All data refer to the connection and operation of a single lamp. When installing and using
more than one lamp, the applicable legal requirements for a proper electrical installation
must be observed.
H10 000 XXX
H11 000 XXX
xN optic: extra narrow beam pattern
N optic: narrow beam pattern
W optic: wide beam pattern
D optic: double asymmetrical beam pattern