BH FITNESS H720RBM Instructions De Montage Et Utilisation page 9

IMPORTANT SAFETY ADVICE.-
PRECAUTIONS.
This bicycle has been designed and constructed to
provide maximum
precautions should be taken when using exercise
equipment. Read
assembling and using the bicycle. The following safety
precautions should also be observed:
1 Keep children away from this equipment at all times.
DO NOT leave them unsupervised in the room where
this bicycle is kept.
2 It can only be used by one person at a time.
3 If you experience dizziness, nausea, chest pains or
any other symptom while using this appliance STOP
the exercise. SEEK
IMMEDIATELY
4 Use the appliance on a level, solid surface. DO NOT
use the bicycle outdoors or close to water.
5 Keep your hands well away from any of the moving
parts.
6 Wear clothing suitable for doing exercise. Do not
use baggy clothing that might get caught up in the
bicycle. Always wear running shoes or trainers when
using the machine. Make sure all laces/cords are tied
correctly.
7 This appliance must only be used for the purposes
described in this manual. DO NOT use accessories
that are not recommended by the manufacturer.
8 Do not place sharp objects near the machine.
9 Disabled people should not use the machine without
the assistance of a qualified person or a doctor.
10 Do warm up stretching exercises before using the
equipment.
11 Do not use the bicycle if it is not working correctly.
Caution: Consult your doctor before beginning to
use the bicycle.
important for those over 35 or suffering from
health problems. Read all of the instructions
before using any exercise equipment.
Keep these instructions safe for future use.
GENERAL INSTRUCTIONS.-
Carefully read through the instructions contained in
this manual. It provides you with important information
about assembly, safety and use of the machine.
1 This appliance has been tested and it complies with
standard EN957, suitable for professional use User
maximum weight 180kg. Braking is independent of
speed.
2 Parents and/or those responsible for children should
always take their curious nature into account and how
this can often lead to hazardous situations and
behaviour resulting
circumstances should this appliance be used as a toy.
safety. Nevertheless,
the whole manual
MEDICAL ATTENTION
This advice is especially
in accidents. Under
English
3 The owner is responsible for ensuring that anyone
who uses the machine is duly informed about the
necessary precautions.
certain
1. ASSEMBLY INSTRUCTIONS.-
before The assistance of a second person is advisable
for the assembly work.
Take the unit out of its box and make sure that all of
the pieces are there Fig.1:
(76) Main body; (17) Handlebar stem; (28) Handlebar;
(31) Stabiliser bar with wheels; (48) Stabiliser bar with
adjustable blocks; (72) Monitor; (54) Cover; (74)
Saddle; (19) Saddle post; (55L) Left pedal; (55R) Right
pedal; (78) Cover; (91) Knob; (106) Upper tray; (108)
Lower tray; (102) Monitor front cover; (109) Monitor
back cover; (75) Mains transformer.
Bag of screws containing: (63) Screw M8x15; (64) Flat
washer D8.5; (7) Self tapping screw ST4.0x15; (65)
wave washers M8; (89) Screw M5x12; Double ended
spanner; Wrenches.
2. FITTING THE STABILISER BARS.-
Rest the main body on the floor, as shown in Fig.2.
Take hold of the front stabiliser bar fitted with wheels
(31), fit the bolts (63) and washers (64), (65) and
tighten securely.
Take the rear stabiliser with adjustable feet (48) and
position it on the machine's rear stand, insert the bolts
(63) with the washers (64), (65), tighten securely,
Fig.2.
3. FITTING THE HANDLEBAR STEM.-
Take the main post (17) and and fit the lower tray
(108) and the cover (54) as shown in Fig.3. Bring the
main post (17) up to boss on the main body (76),
connect the terminals, Fig.3.
Slip the main post (17) over the boss on the main
body (76), Fig.3, making sure not to snag any of the
cables.
Fit the screws (63), and the washers (64), (65), Fig.3,
and tighten securely.
Lower the bottom cover (54) for the main post down
over the boss section of the main body (76).
4. INSTRUCTIONS FOR FITTING THE
SADDLE.-
Take the tube for the saddle (19) and attach the
saddle (74) to it, Fig.4, tighten the nuts (Z).
Fit the cover (78) and position the tube for saddle (19)
on the boss on the main body using the knob (91),
Fig.4.
VERTICAL ADJUSTMENT.
no
In order to raise or lower the saddle post, first loosen
off the control knob (91) on the saddle post a little by
turning it in an anticlockwise direction, pull the control
9
MOD. H720RBM