After The Massage; Cleaning - SilverCrest SSMN 2 A1 Mode D'emploi

GB

After the massage

Cleaning

44
■ Press the "On / Off " button
slow massage.
■ Press the button "Massage"
the button "Massage"
■ Press the "Warmth" button
4 and the massage heads 1 light up. Press the "Warmth" but-
button
4 again to switch the warmth function off . The light on the massage
ton
heads 1 as well as the button "Warmth" button
NOTICE
► The appliance switches off automatically after 15 minutes.
■ If you want to terminate the massage before the end of 15 minutes and wish
to switch the appliance off , press the "On/Off " button
1) Disconnect the connection plug 8 from the socket 3.
2) Remove the appliance.
3) Disconnect the mains adapter 7 from the mains power socket.
RISK OF ELECTRIC SHOCK
Before you clean the appliance, always disconnect the mains adapter 7
►
from the mains power socket.
► UNDER NO CIRCUMSTANCES should you immerse the appliance in
water or other liquids during cleaning!
WARNING - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.
NOTICE
► The zipper on the appliance must not be opened, because it is fi tted only
for production-technical reasons.
6. The massage heads 1 begin with the
5 to increase the massage speed. Press
5 once again to stop the massage heads 1.
4, to switch the warmth on. The "Warmth"
4 goes out.
6.
SSMN 2 A1