Before Use; Operation; Warming Function; Switch Off The Product - SilverCrest SSNR 12 A1 Instructions D'utilisation Et Consignes De Sécurité

cupboards or other inflammable
materials.
Do not use the product on swol-
len, burnt, inflamed, diseased
or injured regions of the skin
and body areas. If in doubt,
obtain medical advice before
using the product.
Never use the product if you
have injuries or pain in the
neck / back or spine.

Before use

Note: Remove all packaging material from the
product.
Always keep the cover
cushion before use. Only the cover
1
intended to be washed according to Care and
Cleaning Section.
Place the massage cushion
and fasten it to the back of the high chair with
the Velcro strap
12
Connect connection plug
at the back of the massage cushion
Plug the mains power adaptor
power socket.
Sit on the chair and ensure the massage
cushion is in the desired position.
1

Operation

Switch on the massage cushion
the power button
5
the blue light indicator switches on.
Press the outward rotation button
rotation of massage heads
indicator switches on above the button.
on the massage
11
11
on a high chair
1
.
to the socket
10
.
1
to the mains
9
by pressing
1
on the control handset
to start
6
. The blue light
2
To reverse the rotation direction, press the in-
ward rotation button
indicator switches on instead.
Note: Never use the product for more than
15 minutes. A longer massage may lead to ten-
sion caused by overstimulation of the muscles.

Warming function

To complement the massage with the warming
function, press the light and heat function but-
ton to turn on the heat function. The red light
8
indicator switches on.
Note: The warming function can only work when
the massage heads

Switch off the product

To switch off the product, press the power
button , all indicators will go off and the
5
massage heads
is switches off automatically after 15 minutes.
To turn off completely, disconnect the mains
power adaptor

Cleaning and care

4
LIFE BY ELECTRIC SHOCK!
Disconnect the mains power adap-
tor from the mains socket and unplug
9
connection plug
before cleaning.
or mains power adaptor
Ensure the massage cushion
dry before connecting the mains power
, adaptor .
3 9
Do not use abrasive, aggressive or chemical
cleaning agents to clean the massage cushion
. It could damage the product.
1
Never allow any liquid to enter the massage
cushion .
1
. The other blue light
7
are in operation.
2
stop rotating. The product
2
from the mains socket.
9
DANGER TO
from the socket
10 4
Never immerse the product,
into water.
9
is completely
1
GB/IE/NI 9