Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Basic Operation
FUNCTION INPUT MODE
STANDARD
SURROUND PARAMETER
DTS NEO:6 mode
1
STANDARD
Press the
button to select the DTS
NEO:6 mode.
The mode switches as shown below each time the button
is pressed.
II
DOLBY PL
x
2
Play a program source.
3
SURROUND PARAMETER
Press the
select the surround parameter mode.
4
SELECT
Turn the
knob, and press the
F F
G G
or
button to select the optimum mode for
the source.
5
SURROUND PARAMETER
Press the
CURSOR D D
press the
or
various parameters.
STANDARD
SURROUND MODE
FUNCTION
SELECT
INPUT MODE
6
Turn the
F F
or
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
DTS NEO:6
7
Press the
parameter mode.
button to
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
CURSOR
button, and
H H
button to select the
ENTER
SURROUND
PARAMETER
CURSOR
SURROUND
BACK
SELECT
CURSOR
knob, and press the
G G
button to set the various surround
ENTER
button to finish the surround
21
ENGLISH
2 Surround parameters w
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music:
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
added.
Dolby Digital mode and DTS Surround
(only with digital input)
1
Select an input source set to digital (COAXIAL/
OPTICAL) (
page 36).
Example: DVD
(Main unit)
(Remote control unit)
2
INPUT MODE
Press the
button to set the input
mode to "AUTO" or "DTS".
Basic Operation
Publicité
